More new product in the store

Recently added are dropped spindles, engine mounts and a few other goodies.

Like this, a bolt-in transmission crossmember for stock Model A frames. Allows you to use ’35 up style transmission mounts and a 48-52 Ford F1 brake and clutch pedal set. 

 

1955-1959 GM Dakota kits very soon. AND MORE!

Been working on the design for the newest kit to our line. The 1955-1959 GM Truck Dakota kit. We will have this ready by the end of September in two forms. Our standard kit that accepts the stock ’87-’96 Dodge Dakota componentry and this will be our first venture into a tube control arm and coil over front end! Yes, you read that right we are going to offer tube control arms very soon. I have been working on the design and the fixturing to get these to a reasonable cost. So look for an official release of the newest kits very soon.

We have also been working on engine mounts and bolt on anti-roll bar mounts. I have some almost ready to go for Ford and Chevy engines in the 35-56 F100 kits. I need to check fitment on the others before we release them.

 

 

New information regarding springs and brakes

I do my best to keep up with information on all of our products. I was recently informed that the earlier 1973-1982 Dodge D series rotors for the 3000 pound front axle take a different bearing and are not compatible with the Dakota spindles. I made a quick note on the D-series caliper bracket selection about this change and will soon update all of the information to reflect the correct interchanges.

This morning however, was a question about springs for the Dakota IFS kits with 302 Fords. This is a work in progress and as I gather more information about the spring selections I will add it to the list to help you guys get the most out of your front end. This new information about the spring selection is in the Dakota Tech section.

Instruction sheets for the 65-66 F100s

I have to apologize for not getting this done sooner, but here they are. A real set of instructions for you guys.

CLICK HERE FOR THE LINK TO THE INSTRUCTIONS

New product: D-series Caliper Brackets

We have started offering the caliper brackets that allow you to use the Wilwood D52 Dual Piston caliper bracket and the larger rotor from the ’73-’93 Full size trucks on your Dodge Dakota based front end. Have a look CLICK HERE

Customer’s Rides Page

Have one of our kits installed in your ride? Send in pictures or links to or of your stuff with a short descriptio and I will post it in the new tab under “Photo Library”

Taken by a friend at the HAMB Drags

Taken by a friend at the HAMB Drags

Final edits, going to production for the 65-66 F100 Dakota IFS kits

Here is the final drawings of the kits for the 1965-1966 F100’s. I am in process of making a few stamping dies and cutting new parts.

Bill Wilson is the lucky guy that gets the first official installation. He brought us the donor frame we have been prototyping with. Last Saturday he dropped off his actual truck frame for installation of the new kit.

1030-656 Crossmember assembly B

Complete crossmember kit for 1965-1966 Ford F100 trucks

 

Kits are $750 and will come with boxing plates, crossmember and spring towers as well as upper control arm mounting hardware and shims. You will need a donor front end from a 1987-1996 Dodge Dakota 2wd with 4 or 6 cylinder springs. The V8 Dakota springs are best for applications where you want to keep the ride height tall or are running an engine in excess of 750 lbs.

 

 

Click the SHOP button at the top of the page, you can order one today!

Next up on the Dakota kits

I have a 1953-56 F100 frame disassembled Bill W donated a 1965-66 frame, both ready for drawing up the kits and over the next few weeks I will be spending my after hours getting them ready for market.

Chris Shelton came by a few weeks back and did an installation article showing me install a kit on a 1964 frame clip donated by Dave G (Garbz) and it should hit Classic Trucks magazine in the next few months. So keep an eye out for it!