1961-1964 Ford F100 Brake pedal kit

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)


Re-locates the brake master cylinder for engine clearance using a vacuum power booster. Also changes the pedal pad location lower for more comfortable ergonomics.2013-11-04 17.05.03 2013-11-04 17.04.39 2013-11-04 17.03.57 2013-11-04 17.02.58

In stock

SKU: 2030 Categories: , Tags: , ,


This solves a few problems for hot rodding your 1961-64 F100. The addition of power brakes can be a bit of a pain due to the lack of space on these trucks.

This unit moves the brake booster to the outside by 3.5″ and also moves the brake pedal pad lower just a bit for a more comfortable ergonomic. Steering column placement can be centered up for a better aesthetic also.

Use Ford Ranger boosters from the early 80’s and possibly some of the larger F series trucks of the same years.

Bolts into existing mounting holes on the firewall and dash board. Welding of the old master cylinder hole is required as is drilling the new holes for the new master/booster location.

Additional information

Weight 16 lbs
Dimensions 12 x 18 x 12 in

1 review for 1961-1964 Ford F100 Brake pedal kit

  1. Rated 5 out of 5

    tylerwaldroup (verified owner)

    This worked great on my 64 is did a Volare clip with a 390fe and this saved my a$$ great product well built. My truck is a 4 so I had to weld the clutch pedal part on but th the a auto it would be a simple bolt on the ranger booster is perfect I would strongly recommend this for anyone doing power brakes on a 61-64

Add a review