LA Roadster Show 2017

We are in preparations to be at the 2017 LA Roadster show in Pomona, CA at the Fairplex on June 17-18th (Fathers Day weekend) in two locations this year. We will have our indoor booth again this year, but will also have a spot out in the swap area.

So far we plan on bringing out three ’32 frames with our full X members with show pricing. One will be pinched for 28/29 Model A use. We will also have our accessory K-member legs, stock style brake pedal sets and other bolt on chassis parts.

If you want to pre-order any of the product and have us deliver at the show, give us a call @ 866-553-8996

 

Promo Video

We had Bean’s Book of Rod Shops stop by last week. These guys travel around the country and shoot video of different shops. Here is some footage they took.

Well that was interesting

Sorry for the downtime there. Not exactly the thing I wanted to happen, as soon as I got back in the shop Monday from the LA Roadster Show there were a few things that needed updating in the background on the website. One of those things did not want to play nice and caused a site failure. I ham-handed my way around trying to discover the problem to no avail. But from listening to the Tom Woods show, he mentioned that he uses a website called www.fiverr.com for instances just like this. Very impressed by the speed and expertise used to get us back up and running.

On the Roadster Shown note, we were inside for the first time. It was a bit of change for us. Usually we are in the swap area blowing product out and sweating our butts off. I swore off fighting for a space last year. It’s not an experience I want to do any longer. Plus the air conditioning sounded pretty good to us. Was it a success, time will tell. Not as much product left, we did take orders and 2016-06-18 07.08.14are shipping them this week. I will be back next year, should be the same spot in Building 4.

LA Roadster Show 2016

It’s almost upon us. This June 18 and 19th, Father’s Day weekend, is the 52nd Anniversary Roadster Show and we will be inside building 4 for the first time!

In years past we were in the Swap Meet area but changes over the last few years has made it difficult for us to set up there. That and we were bringing out the used goodies you guys could use. Well this year, it’s all new stuff. We are bringing ’32 Ford stuff and working on a few new products. I will have two frames ready to go, full knock down at a Roadster Show special price.

 

Look for us in Building 4 spaces SAA 26 and 27

 

Putting up Customer Rides

I have a page dedicated to customers that have used our product. HERE

If you would like me to add you to the list, send me some pictures and a description of your build. Anything from K-member legs, brake kits or full chassis builds are welcome.

New product in the store!

As promised earlier, we have the 57-60 F100 and 55-59 GM truck Dakota IFS kits available in the store. These are for the stock arm Dakota suspension systems. If you want air bag systems, any of the kits that would fit any of the Dakota two wheel drive systems should work in our kit. However, we are getting hit pretty hard to do a dedicated IFS kit with tubular control arms and air bags. So we are going to do our best to get them drawn up and in production before Christmas!

Also in the works are engine mounts for the Dakota IFS kits. I think we have the Chevy engine mount systems ready to go and will be in the store in a few weeks. The Ford Windsor style mounts are still in need of some work to make them what we want. And if we can, the LIMA series (429-460) engine mounts also. These of course are going to require a rear sump oil pan to clear the rack and pinion like any other IFS kit on the market.

2015-11-13 13.38.32Keep an eye peeled for our new line of rear suspension kits too! There will be three kits ranging from near stock to work with your nearly stock Dakota IFS and a lowered kit as well as a hammered kit with a 5 plus inch C-notch built into the boxing system. These kits will be an un-parallel and unequal length four bar with a panhard rod. A moderately low roll center that works with pickups and all come with 100% anti-squat at ride height and minimal changes in pinion angle to curb any driveline vibration. Heavy duty construction with greasable polyurethane bushings and RideTECH shocks.

We are also working on the ’32 Ford chassis components, The front and rear bolt in crossmembers should be in production by mid-January. We are also considering a full bolt in X-member similar to our ’32 system for the 33-34 Ford frames. Let us know in the comment section what you think and what you would like to see in that kit.

LA Roadster Show 2015, We Were There!

What a show. The heat had to be a factor in the low turn out. That and the guys that go in first roped off over 90% of the spaces, leaving many swappers to turn around and go home. I spoke to two guys that demanded their $70.00 back because there were no available spaces. Even on Saturday a large percentage of the “saved” spaces were still empty with yellow tape and cones and maybe a lawn chair and a small pile of scrap metal to guard the space. I cannot see this happening for much longer before they the LA Roadster guys start having to do assigned spaces or at least check that the guys that paid for one spot only have one spot and so forth.

We set up with Hotrod Ron and had a good selection of stuff. The reception to our new fully bolt together ’32 frame was encouraging. The SBC engine saddle was the hit of the show! Now I’m going to have to put them into the store. Look for those items in the near future, but if you’re impatient you can always give me a call.

IMG_20150619_135942We talked with several satisfied customers and even saw Tim Thompson and his wonderful ’32 3W with the first mail ordered Full-X member installed. Of course Dr Marvelus and I had to take the opportunity for a shot of us all together. 2015-06-19 13.55.22

It’s summer time and we are still at it. More new products are on the way.

2015 LA Roadster Show, we will be there!

Next weekend is one of the coolest show/swaps in the country, held in Pomona California for Fathers day weekend. I have been attending this show since the 70’s as a kid and now as a vendor in the swap meet. We will be bringing out our Full-X members, Brake pedal assemblies, wish bone mounts and other goodies as well as some great stuff to swap. Stop on by, we will be in the swap area.

1934 Ford Pickup for sale

Robert has decided to thin his heard, the truck has to go. He is very firm on $6,500.00

FOLLOW THIS LINK TO THE CRAIGSLIST AD

FOLLOW THIS LINK FOR BIGGER PICTURES

 

 

Full X-member for 32 Fords

Full bolt in, actually stiffens the frame and allows for a transmission change. Now includes front frame horn liners and “bolt-in” front split wishbone mounts.

Available now, hit the store! 

2013-10-22 11.55.42 2013-10-22 11.55.05 2013-10-22 11.55.14 2013-10-22 11.55.24