Machine building service
Our background is in fabricating. This reaches beyond just building cars, but to industrial equipment as well. From building simple fixtures to short run low tonnage stamping and forming and as far out as full machine building of a complex nature.
Recently we built new movable stands for our shrinker/stretcher machines. Their modular design allows for reconfiguration for different styles of head units to stave off obsolescence. Designed in our 3D solid modeling software, cut on the CNC plasma and press brake formed the 1/4″ steel body is fully TIG welded. Future machines will be welded with Dual Shield MIG to save time. The pedal arms are cut from 3/8″ steel and are bronze bushed with 3/4″ CR axles and all high quality hardware was used. This is meant to last.
3D solid model of the shrinker/stretcher stand
Using the new shrinker stand
And we are now in process of building a new Helve Hammer/Planishing hammer hybrid. This hammer will be modular and reconfigurable also. This machines primary function is for sheet metal forming. Traditional Helve hammers are very large and hit very hard. Mostly used by armorers and for roughing in compound curves in heavy gauge sheet metal, our needs require a softer touch. The purpose of this machine is for the rapid forming of automotive body panel and trim. It will have multiple hammer arms and drive linkage to tailor the style of hit from a heavy fall of a Helve to a rapid plannishing action.
The body is made fro 3/8″ and 1/2″ HR A36 steel and will be welded with Dual Shield. The stabilizing legs are 1 1/4″ 0.125″ DOM tube and will be gusseted. The body assembly will be mounted to the floor with anchors and high density polyurethane mounts and machine feet for leveling. This will absorb some of the vibration and dampen the machine for slightly better user comfort.
Helve Hammer hybrid base and arm
Helve hammer drive system detail
Helve Hybrid base tack welded together
Earlier this week we produced a simple stamping die to press a design into 18 gauge sheet metal for a firewall on the ongoing 1931 Model A sedan build. This die and punch was made from 3/16″ HRPO A36 steel and will actually last on a short production run.
Die and punch set for firewall design
First pressing test
These are just a few recent examples of what we can do for you. Feel free to contact us about your project, fixture table, art design, structure or small machine. We have the experience in metal fabrication and forming , tube bending, notching and pneumatic power, hydraulic power, plumbing and and mechanical power transmission to meet your goals. We can build from your spec or if you need our design services to turn your napkin sketch into a reality, we are here to service your needs.
1931 Model A build up: Front Suspension
Last left off with the frame fab, we have done a ton since.
This HAMB thread covers quite a bit of the progress: http://www.jalopyjournal.com/forum/showthread.php?t=404411
This is one of those things that gets overlooked in the details. The aftermarket has come up with some stellar components and some not so stellar. But when you use high volume production parts, your car will look just like everyone elses. This car does use SoCal hair pins and a SoCal forged heavy beam axle but that’s about where it all ends.
This car runs the spring behind the axle, what is commonly known as “suicide” and requires special batwings or hair pins to mount the spring and carry the entire load of the front of the car. Not one to skimp out we cut and machined a nice pair for this car. Our initial mock up was using the supplied SoCal stainless steel pieces. Very nice with a shock mount integrated. Just not the parts we really wanted.
With a way to attach the spring to the axle, we needed to attach the hair pins to the frame. The shape of the frame plus the location gave us a few different options. Most people would weld a tube or bung into the frame to attach a HEIM or bushing to. We opted for stainless steel tie rod ends from So Cal and fabricated this nifty little plate that cancels the angle between the frame and hair pin.
1931 Model A Sedan build
This build has been in the works for a few months now. A 1931 Ford Model A that has made it’s way here from Bakersfield California passing through many promising hands before our customer got it. Now we are working for a classic hot rod look in the lineage of Doane Spencer 1932 Ford Roadster.
Starting off with two lengths of 2X4 inch pickled and oiled box tube, we capped the ends and filled them with packed sand. Using a process called bump bending in a hydraulic press we are able to curve the frame rail sections to conform to the outer profile of the body. Once the basic profiles were created using a simple drawing on the floor we were able to transfer these dimensions into Alibre’, our solid modeling software. This allows me to make design decisions before committing our customers cash in wasted labor. We can also take this data and export it into the CNC plasma to make one off parts for each build.
Perimiter frame mockup
The center crossmember is fabricated from 1 3/4″ tubing, the frame rails got a series of 2 1/2″ holes on the inside and the rear kick-up is fabricated from 2X3 P&O steel tube. The front spring crossmember is a generic hot rod Model A part. we did several mock ups with the front and rear suspension parts in place to confirm our measurements and to make sure we had the “look” down tight.
Perimiter frame and mocked up suspension parts
Open House and the holiday Kick-Off
Howdy folks, It’s that time of year again. Man oh man did this summer fly by, its been a tough one for sure.
I wanted to say a good by to a good friend and mentor to me, Rick Stewart. I owe a ton of my style and techniques to this man. He is one of the very few that pushed me into this business and I am honored to have known him and called him a friend. I will miss him.
http://www.hansenmortuary.com/obit.php?id=229
On a brighter note, the annual Open house party. This will be the 8th one, so that means the seventh annual? Whatever, it’s gonna be a blowout again. Chris Swanberg is bringing his furnace and we’re gonna melt some metal and show everyone how to do at home casting techniques! This should be a crowd pleaser. And I will give everyone a demo on gas welding sheet metal. DJ Dan and his side-kick Dedo or is it the other way around will be spinning the wax and vinyl again. Most likely an impromptu mini-bike race will break out and there may be some burnouts, you just never know.
We have had some employee shakeups but are pleased to announce Wes Zeller as our newest addition to the staff.
Check the Photobucket over there on the right for the latest pictures.
Steve
Turnover
Good and bad but we are on track.
We finally got confirmation on the red GT and knocked it out in record time. While we were waiting we actually got another Studebaker GT job, this one a complete build with a narrowed Corvette rear, all new box tube frame, chrome and polished everything. Will be posting pictures in the Photobucket account as I take them.
The Corvette Kit car actually looks like a car. The body mounts are going on as I type. Pics of it to come also…
Check back in a bit,
Steve
The Next few months
With the economy the way it is, most businesses are lucky to be in business right now. We are very fortunate to be one of those that is doing as well as could be expected.
To get this blog rolling, I wanted to state some of the things that have happened and what is to come. In 2007, Adam Young Fabrication became a partner and added his dropped axle service to our corporation. His intent was to expand the product line and push forward our Dodge Dakota based suspension kits leaving me to do more product development and custom fabrication. We did produce prototypes of our new Gen III coil over suspension kit and got two of them on the road. First up was a complete chassis under the Dynacorn 53 Chevrolet pickup. Second was a local car, 1941 Packard Sedan and both were able to push beyond our customers expectations in drive, comfort and handling.
Due to unforeseen circumstances Adam relocated to Seattle Washington at the end of 2008, this put a huge dampener on the business and product development. We came to the solution of splitting the business this year. Adam has been slow to get his new fabrication shop running but the end goal is for him to produce the current product line and start in on the new complete coil over Gen III suspension. With a completion date of September 09 for his new shop, he will also produce the standard frames and chassis for 1948-1956 Ford and 1947-1959 GM trucks from his location as (tbd) Adam Young Fabrication by the fall of this year.
Currently we have parred down the product line to match sales. We only offer the basic crossmember kits for 1948-1964 Ford trucks and 1955-1959 GM trucks. But our focus here at Industrial Chassis has changed.
Our new focus is centered around custom fabrication and suspension tuning. There are far too many hot rods and customs that have been on the road that do not perform as the owners prefer, and it is our goal to step in and resolve these issues. Drawing on my nearly 20 years of experience building, maintaining and repairing pre1965 cars and trucks, I can pinpoint a solution and perform the necessary repair or re-engineering needed.
Of course we will continue to offer our services for custom chassis fabrication. We will add to our services, suspension design and installation, custom frames and crossmembers, custom exhaust, turbo charging, fuel and brake line installation, custom fuel tanks and engine bracketry, brake pedal and steering setups. Anything that you as a hot rod or custom owner don’t feel comfortable doing yourself or if you just happen to like our mechanical style, we are here for you, our customer.
Apperance wise we are going to do some remodeling of the shop. The re-installation of a showroom and customers lounge. A service bay where you can bring your nicely finished vehicles and keep them out of the heavy fabrication area. New equipment and software to not only diagnose an issue but to speed up the process to repair or fabricate. Also look for new apparel and other merchandise to support your local hot rod shop.
Our reputation was built on quality parts and knowledgeable service, something that will not change.
Steve