Posted on Leave a comment

Machine building service

Our background is in fabricating. This reaches beyond just building cars, but to industrial equipment as well. From building simple fixtures to short run low tonnage stamping and forming and as far out as full machine building of a complex nature.

Recently we built new movable stands for our shrinker/stretcher machines. Their modular design allows for reconfiguration for different styles of head units to stave off obsolescence. Designed in our 3D solid modeling software, cut on the CNC plasma and press brake formed the 1/4″ steel body is fully TIG welded. Future machines will be welded with Dual Shield MIG to save time. The pedal arms are cut from 3/8″ steel and are bronze bushed with 3/4″ CR axles and all high quality hardware was used. This is meant to last.

3D solid model of the shrinker/stretcher stand
Using the new shrinker stand

And we are now in process of building a new Helve Hammer/Planishing hammer hybrid. This hammer will be modular and reconfigurable also.  This machines primary function is for sheet metal forming. Traditional Helve hammers are very large and hit very hard. Mostly used by armorers and for roughing in compound curves in heavy gauge sheet metal, our needs require a softer touch. The purpose of this machine is for the rapid forming of automotive body panel and trim. It will have multiple hammer arms and drive linkage to tailor the style of hit from a heavy fall of a Helve to a rapid plannishing action.

The body is made fro 3/8″ and 1/2″ HR A36 steel and will be welded with Dual Shield. The stabilizing legs are 1 1/4″ 0.125″ DOM tube and will be gusseted. The body assembly will be mounted to the floor with anchors and high density polyurethane mounts and machine feet for leveling. This will absorb some of the vibration and dampen the machine for slightly better user comfort.

Helve Hammer hybrid base and arm

Helve hammer drive system detail
Helve Hybrid base tack welded together

Earlier this week we produced a simple stamping die to press a design into 18 gauge sheet metal for a firewall on the ongoing 1931 Model A sedan build. This die and punch was made from 3/16″ HRPO A36 steel and will actually last on a short production run.

Die and punch set for firewall design
First pressing test

These are just a few recent examples of what we can do for you.  Feel free to contact us about your project, fixture table, art design, structure or small machine. We have the experience in metal fabrication and forming , tube bending, notching and pneumatic power, hydraulic power, plumbing and and mechanical power transmission to meet your goals. We can build from your spec or if you need our design services to turn your napkin sketch into a reality, we are here to service your needs.

Leave a Reply