I want to thank all the people that came by both booths to say hello. You guys made our trip worth it.
We came loaded with product, but something was amiss. I’m not sure exactly what happened to the show, but not only were prices up for us vendors but there were hardly any roadsters. I have seen a couple hundred maybe, this year more like 80-ish showed up. The Preferred Parking area on the North side was mostly vacant on Saturday and Sunday. The area over by the botanical gardens (South side) was pretty full on Saturday but on Sunday it was mostly vacant. The swap was spread out. There were guys jumping the line and buying up blocks of spaces and then didn’t show up. While in line waiting to pick my spot I overheard some of the guys that jumped the line bragging about buying up a few thousand dollars worth of spaces. Of course, the deal is, once you buy a space, you get grandfathered in and can keep getting the same spots for future events. The North East section was sold out by Thursday and on Saturday, maybe half of those spots were being used, Sunday maybe a third of those spots had stuff in them.
Here is a short video I shot at 7:30 in the morning on Sunday.
Granted, this is early in the morning. As the day went on, more swap meet vendors packed up and left by 9am. We drove around waiting for other vendors in the show area to show up so we could pick up things we had on order and chatted with various vendors. Some said they felt like a UPS service because all they did was deliver pre-ordered parts. They seemed to have the same experience we did. There is a rumor going around that Roadster Shows will “FINE” us for leaving before 4 pm on Sunday. I can assure you that if they do try and pull something like this, I will not attend the LA Roadster Show in 2018. I know we aren’t a big deal to most, but in talking to some of those big name guys, they won’t be back either.
I have been going to the LA Roadster Show since 1974 as a kid. It has been a tradition of mine to go, I look forward to it, it’s a big deal. Now I’m not so sure. I can understand the Roadster guys getting upset that they no longer get a free steak dinner and a pewter mug for the price of just showing up, the thing I find very puzzling is that the general public just didn’t show up.
We are in preparations to be at the 2017 LA Roadster show in Pomona, CA at the Fairplex on June 17-18th (Fathers Day weekend) in two locations this year. We will have our indoor booth again this year, but will also have a spot out in the swap area.
So far we plan on bringing out three ’32 frames with our full X members with show pricing. One will be pinched for 28/29 Model A use. We will also have our accessory K-member legs, stock style brake pedal sets and other bolt on chassis parts.
If you want to pre-order any of the product and have us deliver at the show, give us a call @ 866-553-8996
Sorry for the downtime there. Not exactly the thing I wanted to happen, as soon as I got back in the shop Monday from the LA Roadster Show there were a few things that needed updating in the background on the website. One of those things did not want to play nice and caused a site failure. I ham-handed my way around trying to discover the problem to no avail. But from listening to the Tom Woods show, he mentioned that he uses a website called www.fiverr.com for instances just like this. Very impressed by the speed and expertise used to get us back up and running.
On the Roadster Shown note, we were inside for the first time. It was a bit of change for us. Usually we are in the swap area blowing product out and sweating our butts off. I swore off fighting for a space last year. It’s not an experience I want to do any longer. Plus the air conditioning sounded pretty good to us. Was it a success, time will tell. Not as much product left, we did take orders and are shipping them this week. I will be back next year, should be the same spot in Building 4.
It’s almost upon us. This June 18 and 19th, Father’s Day weekend, is the 52nd Anniversary Roadster Show and we will be inside building 4 for the first time!
In years past we were in the Swap Meet area but changes over the last few years has made it difficult for us to set up there. That and we were bringing out the used goodies you guys could use. Well this year, it’s all new stuff. We are bringing ’32 Ford stuff and working on a few new products. I will have two frames ready to go, full knock down at a Roadster Show special price.
What a show. The heat had to be a factor in the low turn out. That and the guys that go in first roped off over 90% of the spaces, leaving many swappers to turn around and go home. I spoke to two guys that demanded their $70.00 back because there were no available spaces. Even on Saturday a large percentage of the “saved” spaces were still empty with yellow tape and cones and maybe a lawn chair and a small pile of scrap metal to guard the space. I cannot see this happening for much longer before they the LA Roadster guys start having to do assigned spaces or at least check that the guys that paid for one spot only have one spot and so forth.
We set up with Hotrod Ron and had a good selection of stuff. The reception to our new fully bolt together ’32 frame was encouraging. The SBC engine saddle was the hit of the show! Now I’m going to have to put them into the store. Look for those items in the near future, but if you’re impatient you can always give me a call.
We talked with several satisfied customers and even saw Tim Thompson and his wonderful ’32 3W with the first mail ordered Full-X member installed. Of course Dr Marvelus and I had to take the opportunity for a shot of us all together.
It’s summer time and we are still at it. More new products are on the way.
Next weekend is one of the coolest show/swaps in the country, held in Pomona California for Fathers day weekend. I have been attending this show since the 70’s as a kid and now as a vendor in the swap meet. We will be bringing out our Full-X members, Brake pedal assemblies, wish bone mounts and other goodies as well as some great stuff to swap. Stop on by, we will be in the swap area.
Been a busy few weeks, lots of jobs in and out and progress made on the more long term jobs. The good news is, as we clear out these jobs, the new Dakota Kits are eminent!
Just wrapped up a Vintage Air install on Ron Shives’ 1957 Chevy Hardtop. Such a nice car, we removed the AirTique unit installed a decade or more ago that never quite worked properly and installed a new Vintage Air sure-fit unit. In went a Vintage Air Front Runner package and radiator relocation to the 6 cylinder position so that we had room for a Volvo 850 two speed cooling fan. We also upgraded to a Borgeson Delphi 600 power steering box, Flaming River steering column and did some routine maintenance for him. Overall the car turned out fantastic, very nice daily driver now.
Dr Marvelus is going to town on Tony’s 60 Bonneville, pretty rusty car in all the structural areas, so look for updates on that soon.
Larry Ivy’s 34 PU is roller status, cab goes on and the controls are going in soon.
More importantly, Bob’s 32 5W chassis will be going together next week in preparation for the Deuce Day show. We are doing the second build out of our “Bolt – In” center X-member! These will be available in the store very soon.
And the news you are waiting for, the Dakota kits are in process as soon as Bob’s 32 frame comes off. First up will be the 65-66 frames and the 53-56 and 57-60’s immediately after.