We have been building and stocking some parts. Not everything is back. Here is a list of what’s in stock right now.
1953-56 Ford F100 Dakota kit
1957-60 Ford F100 Dakota kit
1961-64 Ford F100 Dakota kit
1965-66 Ford F100 Dakota kit
1947-1955 GM (AD) Dakota kit
Early Oldsmobile engine mounts
Model A trans crossmember F1 Style
1932 Ford K-legs Straight (flat floor)
1932 Ford K-legs Bent (stock floor)
1932 Ford Full X-member (stock floor)
Studebaker stuff is not on the list of products to build. Our fixturing was damaged during our move and it’s low volume enough to not want to re-create the fixture.
We are contemplating a run of tubular control arms for the Dakota to be used with coil overs. We have a special kit to work with these arms that can be ordered with the tube set that simplifies installation. Tube arms for Coil overs are going to be a bit expensive because of the limited runs. The crossmember we have special for the tube arms is a bit cheaper because there are not spring pockets. You will still need spindles, brakes, rack and pinion, and coil overs to complete the front suspension kit.
I am getting really hammered with requests for product, I really want to get back to production. This COVID virus has really put the brakes on everything. We had hoped to be up and running by last month, more likely we will have things working and ready for production by mid-August now.
Since our merge with Phoenix Hotrod Company in February, the move came to a crawl. The preparation for our new location in Tempe Arizona almost ground to a halt. The electrical install has taken way longer than we anticipated. However, things are finally getting wrapped up. Machinery is finally getting placed and we hope to move the remaining equipment from the Deer Valley location of Phoenix Hotrod by mid-July. The push to get going over there is urgent.
It will likely take us a few weeks if not months to get the workflow worked out, so production may be a little slow in coming. But it looks like we will get everything back online before the end of summer and, AND new stuff also.
We had a customer complain about one of our Studebaker clips not capable of an alignment recently. With all the shims removed from the adjusting plate, there was still negative camber.
I had to investigate further, and on a chassis we are supplying right now we had the same issue come up. This is brand new for us, so I needed to investigate. This is what I came up with. The upper ball joint bore is moved outboard about 1/2″.
This is causing a few problems, First off is the Camber issue. Second is going to be an issue of scrub radius. This may not cause any driveability issues, but you may notice a bit more wheel kickback on uneven road surfaces.
Short solution is to use a longer control arm, in some cases where the stock slot and T-bolt are used, you may not have much of an alignment issue.
I spoke with a representative from Heidt’s this afternoon. Of course this issue has never come up with them. He informed me they use a 1/4″ longer control arm at 8″ from pivot to ball joint. No reason given as to why. I want to caution everyone that if you are to mix-match parts, you may end up with a front end that you can’t align.
We have used the Heidt’s and CPP dropped spindles without this problem. I have used the stock height spindles from SPC and Kaiser without issue.
I want to go further with you as to what these changes will make to the way your front end will drive and handle in a future date. Right now I just needed to get this information out there.
Dr Marvelus and I busted our asses for nine straight months to pull off this build. It’s changed hands a few times now, but still looks great. The new wheels look better than the cast Foose wheels it had.
I have been working on getting the framework done for the new features I want for the website and fixing some of the dumb stuff I had as place holders. Still not done, but happy with some of the progress.
What I received in feed back from customers was navigation on the store, difficulty finding product and such. So my solution is to put multiple paths to find what you are looking for. At the top of the page are categories based on what you have. Not completely finished with them at this point. What I intend is a bit of information, history and links in each and everyone of those by make and year model.
I will also be working on updating and adding new product. So far I’m pretty happy with the new Theme Plugin from www.woothemes.com . Those guys have been more than helpful getting me going after my crash.
Soon we will have some project updates too. We currently have three full on turn-key projects. The 53 GMC is painted. Thank you Cam at Fury in Color! Rick’s 40 Plymouth is making progress, and we took possession of Bob’s 1964 Ford pickup. Look for pictures of that one soon, it’s really eye catching (in a good way!)
One of the reasons for doing the redesign is for you the customer to navigate and find products easier.
The other is to add in a new forum that will go live in the next few days (I hope) where you and I can engage in a more technical sense. I get asked to help people sort their suspension issues on all sorts of vehicles.
I am working to put together a searchable forum where we can get in-depth with the true geometry of what makes your IFS work and why. This will be a subscription service, Sorry folks but more and more of my time is being taken up by answering questions. For those of you who are customers, you will get access to the forums, but for those of you on the fence, the fee will be minimal. In that forthcoming forum, we can get in-depth to get your ride working the way you want it to.
Eventually, I would like to expand the forum to be an offsite, 3rd party tech line for any aftermarket hot rod parts manufacturer. If you would like to participate in some way, PDF files of instruction sheets of kits you have installed would be helpful in growing to that goal.
We are in preparations to be at the 2017 LA Roadster show in Pomona, CA at the Fairplex on June 17-18th (Fathers Day weekend) in two locations this year. We will have our indoor booth again this year, but will also have a spot out in the swap area.
So far we plan on bringing out three ’32 frames with our full X members with show pricing. One will be pinched for 28/29 Model A use. We will also have our accessory K-member legs, stock style brake pedal sets and other bolt on chassis parts.
If you want to pre-order any of the product and have us deliver at the show, give us a call @ 866-553-8996
It’s almost upon us. This June 18 and 19th, Father’s Day weekend, is the 52nd Anniversary Roadster Show and we will be inside building 4 for the first time!
In years past we were in the Swap Meet area but changes over the last few years has made it difficult for us to set up there. That and we were bringing out the used goodies you guys could use. Well this year, it’s all new stuff. We are bringing ’32 Ford stuff and working on a few new products. I will have two frames ready to go, full knock down at a Roadster Show special price.